Modern Wainscoting Styles

11+ Wainscoting Styles To Design Every Room For Your Next Project

Wainscoting gives the best mix of function as well as style by decorating the lower fifty percent of wall surfaces while also safeguarding the wall surface from scuffs and also spots.

This type of wall paneling drew back in the 1300s mainly as a method to shield the lower fifty percent of plaster wall surfaces from damage from points like chairs and also boots.

Today, they make up a vital part of the interior decoration, aiding add some warmth and also style to the area. Wainscoting is particularly fantastic at styling up bare walls that would certainly otherwise look plain and also dull.

Generally, wainscoting (usually pronounced as Wayne’s-Coating) is made from solid timber panels. However these days, there is so much extra range in materials.

You could obtain it in plastic, plywood or medium fiber board (MDF). For even more loan each square foot, you can obtain a customized wood wainscoting panels. Various other materials used, though much less commonly, consist of rock, floor tile, as well as acrylic.

What are wainscoting panels?

Modern Wainscoting Styles
Wainscoting Styles by

Wainscoting panels are the personal boards utilized when setting up wainscoting. Originally contained oak, wainscoting was placed on wall surfaces in order to make living locations added inviting. A certain type of oak, called wainscot, was used to style the paneling. In the future, the sort of timber used transformed due to the accessibility of various other timbers.

Each panel has actually included a tongue-and-groove board in order to permit simple installation. These panels are usually diagonal or had actually added molding around the sides. Between each panel is a slim upright item called a style. The bottom item of the wainscoting is referred to as the rail. Panels are set up either in-front-of or behind the designs in addition to rails.

Nowadays, wainscoting panels can consist of any selection of products, not merely oak. Modern technology has actually permitted wainscoting panels to be produced in sheets, rather than certain boards. This reduces the quantity of problem installing private boards could develop.

Wainscoting Installation

While you could mount your individual wainscoting throughout your house redesigning if you recognize your technique around with devices, it is always best to work with an expert to do an entirely neat wainscoting installation. To preserve time and money, you could acquire pre-made wainscoting panels to make certain that the only work will be installing them onto the wall surface.

There several designs, tones, as well as patterns to select from, seeing to it that you could discover something to match your style. As an example, you could choose a recessed kind of panel, elevated panel or shaker panel.
Wainscoting Height

An integral part of wainscoting is its height. This considerably specifies its appearance as well as how it affects the general style of the room. When preparing a wainscot setup, the first step is to gauge the elevation you want it to get to. Right here are a few tips on how you can Measure Your Walls for Wainscoting Panels.

Usually, the wainscoting goes up to a 1/3 of the wall surface height. This is not an inflexible policy; you could place it lower or greater depending on your particular decoration preferences. Establish the elevation of the bottom wainscoting railing, which typically begins at 7.5 inches.

Procedure the size of the wall surface as well as split it by the number of panels you want, establishing the size of each panel.
For more precision, ask your contractor to assist you take the wall surface dimensions. Utilize these measurements in purchasing the ideal wainscoting panels as well as molding.

Whatever style, height or sort of wainscoting you pick, the impact will certainly be favorably spectacular.

Types of wainscoting panels

1. Raised panel wainscoting

Raised panel wainscoting first came to be prominent in 17th century England as a way of insulation. It is the earliest and most common of the wainscoting styles.

Although many in your home in a Colonial or Queen Anne style home, setting up raised panel wainscoting includes a feeling of eternity to any area or home. One of the most popular spaces to utilize raised panel wainscoting in are the dining-room and also living room.

Raised panel wainscoting is conveniently differentiated from an additional style of wainscoting by a diagonal side, developed by basic molding, around a facility panel The design is usually 30 in– 40 in high around the whole space, though it could be taller. The rail at all-time low of the layout can either be made use of as a baseboard or overlaid with added molding to develop a wall.

If there is a design or extra paneling within the center panel, the style is rather called overlay wainscoting.

Raised panel

1. Cap molding
2. Cove molding
3. Top rail
4. Stile
5. Raised panel
6. Bottom rail

2. Flat panel wainscoting

Recessed flat panels have the simple, clean lines popular in Arts and Crafts and Mission styles. The basic parts list is equally spare. It starts at the floor with the baseboard, which can be a plain piece or built up with shoe and cap moldings.

Next comes the bottom rail (the horizontal piece of the panel frame), followed by the stiles (vertical pieces of the frame) and panels, which slip into grooves cut into the edges of the stiles and rails. The top rail completes the panel frames, and the whole assembly is crowned with a chair or cap rail. A less labor-intensive method is to panel the wall with sheet material and apply the moldings on top of it.

Flat panel

1. Chair rail
2. Top rail
3. Rail
4. Stile
5. Flat panel
6. Bottom rail
7. Baseboard

3. Beadboard wainscoting

Beadboard is made of slim, private boards placed directly beside each other. Each small board is interlocked with its neighbor by means of a tongue-and-groove system.

4. Overlay wainscoting

Overlaid panels simulate the look of raised-panel wainscoting yet permit even more sophisticated layouts. A strong wood overlay is centered between the rails as well as stiles of a level panel and also glued in place, creating a surrounding recess.

Applied ogee molding enhances the result. Overlays can be further as well as extra in-depth compared to milled elevated panels, for an extra Neoclassical appearance. They can likewise be applied directly to a wall, with a chair rail above and also base molding listed below, for fast as well as very easy wainscoting.

Overlay panel

1. Cap molding
2. Freeze molding
3. Top rail
4. Cove molding
5. Ogee molding
6. Overlay panel
7. Flat panel
8. Stile
9. Bottom rail
10. Trim band
11. Baseboard

5. Board and batten wainscoting

The Craftsman style, with its level panels and vertical battens, emphasizes a Shaker-like simpleness. In the old days, the battens were made use of to conceal the seams between specific boards; today, they are commonly mounted over 4-foot-wide panels of hardwood-veneer plywood.

Elevation for batten-style wainscoting could rise up to 6 feet or perhaps greater. At the top, a bigger plate rail often changes the chair rail to supply a system for ornamental objects.

Board and batten

1. Cap molding
2. Cove molding
3. Top rail
4. Batten
5. Panel
6. Baseboard
7. Shoe Molding

6. Combination

Beadboard, which had its origins in 19th-century Victorian and also home styles, is the classic wall surface covering for informal spaces like kitchens, shower rooms, and also back corridors. However you can elegant it up with the enhancement of a row of flat or increased panels.

Here, tongue-and-groove beadboard is combined with level panels for a laid-back yet brightened look that can operate in a dining room or room. Maintaining the middle as well as lower rails purge with the face of the beadboard streamlines the overall appearance.


1. Cap rail
2. Top rail
3. Stile
4. Flat panel
5. Rail
6. Beadboard panel
7. Baseboard
8. Shoe molding

7. Wood wainscoting panels

Wainscoting was initially and exclusively done in timber. The very first timber made use of was a sort of oak called Wainscot Oak. Pine and spruce timbers later on ended up being prominent options for wainscoting as a result of availability.

Today, all type of woods are made use of for wainscoting depending upon the climate and also preferred color. Making use of timber for wainscoting gives a classic, innovative feeling to any kind of area it’s installed in.

When picking a sort of timber for wainscoting, the very first point to bear in mind is just how the wood will react to your environment. A timber that is not right for a particular climate will create problems down the road.

The most effective component of using timber for wainscoting is its adaptability. Wood could be discolored, painted, and cut to suit whatever style is required. However, keep in mind that some woods to not conveniently approve discolorations. Some timbers could also be stained to look much like others.

8. Oak wainscoting panels

Oak is the traditional wood to make use of in wainscoting. Original wainscoting was finished with a kind of oak called Wainscot, where wainscoting got its name.

Oak is a hardwood with a golden tone. Spots and also surfaces could be utilized to transform the color of the timber or enhance its all-natural color. Typically, oak is finished a slightly darker color than it shows up normally. It can, however, be tarnished in a range of shades to match any style.

Oak can be found in 4 x 8 plywood sheets that can be lowered according to the wanted design. The type of panels utilized depends on the wainscoting layout style. Pre-cut panels as well as wainscoting packages are offered, though a lot more costly compared to developing the panels individually.

9. Vinyl wainscoting panels

Plastic wainscoting is a reasonably brand-new choice to conventional timber wainscoting. This could make vinyl panels a lot more pricey than wood as it could be tough to find. The material is water resistant, easy to clean, and also extremely long lasting.

It’s ideal for restrooms and cooking areas as isn’t really prone to mold as well as mold. Naturally, vinyl wainscoting could be set up anywhere and also look right in your home.

Plastic wainscoting comes pre-finished, usually in white, but could be repainted to easily fit with the style of any type of room it’s installed in. Plastic wainscoting panels can be found in a range of simple to set up sizes and designs. There are also reversible panels readily available, to quickly fit the style wanted.

Cleansing and keeping plastic wainscoting is simple. Easy dusting as well as wiping will certainly maintain the vinyl panels looking just as good as new. Families with proactively untidy youngsters will certainly find plastic wainscoting a nice choice to timber. The panels hold up to duplicated cleaning as well as won’t discolor.

10. Plastic wainscoting panels

First and foremost, plastic wainscoting is not the like vinyl wainscoting. They are extremely similar, yet not entirely. Plastic wainscoting is harder as well as much less versatile compared to plastic wainscoting. Both feature the very same type of resilience as well as water resistance. Both are exceptionally unwelcoming to mold and mildew as well as mold growth. Neither plastic neither plastic wainscoting will certainly warp and also rot like wood will.

Plastic wainscoting panels typically are available in beadboard style. It showcases a conventional tongue and also groove system for installment, assisted by adhesive as well as nails where needed.

Plastic wainscoting could be repainted with no primer, yet only with oil-based paints. One more plus with plastic wainscoting is that is could be made to appear like wood. The distinction is barely obvious when taking a look at it.

Plastic wainscoting is perfect for shower rooms, mudrooms, game rooms, utility room, kitchen areas, and also patios. Plastic wainscoting is equally as easy to clean as vinyl. Regularly dirt and wipe clean with a moist towel to maintain it looking fresh.

11. Faux wainscoting panels

Technically, any kind of wainscoting panels that aren’t included wood can be claimed to be artificial wainscoting. For lots of people however, fake wainscoting is completely disregarding premade panels and covering the wall surface in any way. Most synthetic wainscoting panels are made using timber molding or trim to produce a raised panel wainscoting appearance.

Initially, strategy where the wainscoting will certainly be. Identify at what elevation the chair or plate rail will certainly be put. Mount an item of molding there before intending the remainder.

Following find out where the molding boxes will be placed. They can be any kind of size as long as they fit equally between the chair rail as well as wall. Set up thinner pieces of molding or trim to form the boxes. Caulk around the sides of the molding prior to priming.

Finally, paint the synthetic wainscoting as wanted. The shade can be consistent right along the wall or the trim could be a various shade than the wall.

Leave a Comment